Skip to content

Flashforge Dreamer vs Creator Pro: Which 3D Printer is Better?

Flashforge Dreamer vs Creator Pro

3D printers are truly amazing. Anything you imagine can be created in 3D and now with a variety of materials. Not only have the software and printing abilities advanced over the years, but the prices have also fallen. If you are the creative type, Flashforge has a fantastic range of 3D printers for you.

Today, we will be looking at the Flashforge Dreamer and the Flashforge Creator Pro. Both have been upgraded with the ultimate software and materials. Throughout this article, we will look at the specifics of the Flashforge Dreamer and the Flashforge Creator Pro, including their functions, use, and printing capabilities.

There are a few similarities that we will cover first.

Flashforge Dreamer vs Creator Pro

Printing Chamber

These two printers are enclosed. The enclosed chambers protect your 3D printing from outside elements like dust and dirt. The chamber also plays an important role in maintaining a consistant temperature during the process.

The Printing Plate

The Flashforge Dreamer and the Flashforge Creator Pro has aviation-level aluminum plates. These plates provide a perfectly flat surface and can withstand the high temperatures without warping. The plates are 6.3mm thick.

The Nozzle/Extruder

With the Flashforge Dreamer and the Flashforge Creator Pro, you will be able to print in 2 colors thanks to the dual nozzles. The nozzles are 0.4mm in diameter. The Creator Pro takes a filament diameter of 1.75mm. While there is no information about this with the Flashforge Dreamer, we can assume it is the same, as this is the standard diameter.

Warranty

A full warrant comes with both the Flashforge Dreamer and the Flashforge Creator Pro. The length of the warranty is unclear however they both also come with lifetime support.

Title
FlashForge 3D-FFG-Dreamer 3D Printer
Our pick
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
Image
FlashForge 3D-FFG-Dreamer 3D Printer
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
Size
19.1 x 13.2 x 15.8 inches
17 x 19 22 inches
Weight
24.3lbs
24.2lbs
Frame
High-end plastic alloy
Metal frame with acrylic cover
Printing Table
6.3mm aviation-level aluminum
6.3mm aviation-level aluminum
Enclosed Chamber
Build Volume
230 x 150 x 140mm
7 x 148 x 150mm
Nozzle Diameter
0.4mm
0.4mm
Layer Resolution
0.1-0.4mm
0.1-0.3mm
Printing Speed
10-100mm/s
Not Stated
Filament Material
ABS, PLA, PVA, TPU 95A, PETG
ABS, PLA, PLA color change, Pearl, ABD Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive filament, flexible filled filament, metal filled filament, wood filled filament, PP.
Operating System
Windows XP, Windows 7, Windows 8, Mac OS
Windows, Mac OSX, Linux
Software
FlashPrint. Compatible with Slic3r ad Skein forge
PlashPrint. Compatible with Replicator G
Accessories
2 spools f filament (0.6g ABS, 0.6g PLA), USB cable, power cord, tool kit, 4GB SD card
a dual extruder, 2 spool holders, 2 spools of filament (each one kilo and the colors vary), 2 spare blue platform stickers, 2 filamnt guide tubes, a tool kit, an extruder accessory kit, a power cord, a USB cable, an injected PC top cover, a 16GB SD card
Prime status
-
-
Title
FlashForge 3D-FFG-Dreamer 3D Printer
Image
FlashForge 3D-FFG-Dreamer 3D Printer
Size
19.1 x 13.2 x 15.8 inches
Weight
24.3lbs
Frame
High-end plastic alloy
Printing Table
6.3mm aviation-level aluminum
Enclosed Chamber
Build Volume
230 x 150 x 140mm
Nozzle Diameter
0.4mm
Layer Resolution
0.1-0.4mm
Printing Speed
10-100mm/s
Filament Material
ABS, PLA, PVA, TPU 95A, PETG
Operating System
Windows XP, Windows 7, Windows 8, Mac OS
Software
FlashPrint. Compatible with Slic3r ad Skein forge
Accessories
2 spools f filament (0.6g ABS, 0.6g PLA), USB cable, power cord, tool kit, 4GB SD card
Prime status
-
Our pick
Title
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
Image
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
Size
17 x 19 22 inches
Weight
24.2lbs
Frame
Metal frame with acrylic cover
Printing Table
6.3mm aviation-level aluminum
Enclosed Chamber
Build Volume
7 x 148 x 150mm
Nozzle Diameter
0.4mm
Layer Resolution
0.1-0.3mm
Printing Speed
Not Stated
Filament Material
ABS, PLA, PLA color change, Pearl, ABD Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive filament, flexible filled filament, metal filled filament, wood filled filament, PP.
Operating System
Windows, Mac OSX, Linux
Software
PlashPrint. Compatible with Replicator G
Accessories
a dual extruder, 2 spool holders, 2 spools of filament (each one kilo and the colors vary), 2 spare blue platform stickers, 2 filamnt guide tubes, a tool kit, an extruder accessory kit, a power cord, a USB cable, an injected PC top cover, a 16GB SD card
Prime status
-

Now that we have finished with the similarities, let’s move on to the differences between the Flashforge Dreamer and the Flashforge Creator Pro.

Differences Between Flashforge Dreamer and Creator Pro

Appearance

Flashforge Dreamer 3d printer

They look quite similar, and not very different to other 3D printers. You will see the mainframe and the printing axes. The difference boils down to the dimensions.

Flashforge Dreamer

This 3D printer has a high-end plastic alloy frame. It has LED lights for better visibility. It weighs 24.3 pounds. It is 19.1 x 13.2 x 15.8 inches.

Flashforge Creator Pro

The frame of the Creator Pro is made of metal with an acrylic cover. It also has LED lights. It weighs a fraction less at 24.2 pounds. It is 17 x 19 x 22 inches.

The Winner Is- A Tie

The Screen

How you control a 3D printer is often down to personal preference. Some machines have turn knobs, others have keypads, and some have touchscreens.

Flashforge Dreamer

You will be able to use a 3.5 inch HD IPS touchscreen to control the Flashforge Dreamer 3D printer.

Flashforge Creator Pro

The system appears to be less modern yet functions equally well. There is an LCD screen with a button board.

The Winner Is- The Flashforge Dreamer

Read next: Anet A6 vs Anet A8: Which 3D Printer is Better?

Build Volume

Flashforge Dreamer

This determines the size of the projects you are able to build. Remember, a bigger printer doesn’t necessarily mean a larger printing volume, so it’s important to check these numbers.

Flashforge Dreamer

You will be able to create 3D prints with a maximum size of 230 x 150 x 140 millimeters.

Flashforge Creator Pro

The building volume is very slightly different and probably not enough to notice. It is 227 x 1498 x 150 millimeters.

The Winner Is- A Tie

Read next: Creality Ender 3 vs CR 10: Which 3D Printer is Better?

Printing Specifications

Flashforge Creator Pro comparison

Nowadays, 3D printers are fast, accurate and able to print with great detail.

Flashforge Dreamer

This has a layer resolution of 0.1-0.4mm. It has a printing speed of 10-100mm. There is no information on the accuracy of the axes.

Flashforge Creator Pro

The layer resolution is 0.1-0.3mm. The printing speed information is not available. The XY axis has an accuracy of 0.0004 inches. The Z-axis has an accuracy of 0.0001 inches.

The Winner Is- A Tie

Materials for Printing

Flashforge Dreamer review

When investing decent amounts of money in a 3D printer, you want to make sure you are able to use a number of filament materials.

Flashforge Dreamer

You can use ABS, PLA, PVA, TPU 95A, and PETG

Flashforge Creator Pro

There is a huge range of materials you can use: ABS, PLA, PLA color change, Pearl, ABD Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive filament, flexible filled filament, metal filled filament, wood filled filament, and PP.

The Winner Is- The Flashforge Creator Pro

Software

We all know that the software of any device makes a great difference in how easily you can use it.

Flashforge Dreamer

It comes with an SD card that contains FlashPrint, a self-developed software. The Flashforge Dreamer is also compatible with Slic3r and Skein forge.

Flashforge Creator Pro

You will also receive FashPrint on an SD card. It is compatible with Replicator G.

The Winner Is- The Flashforge Dreamer

Operating Systems

Flashforge Creator Pro review

It is crucial that your 3D printer is compatible with the operating system you use. With regards to Windows. It is worth contacting the seller to ensure it is compatible with the latest Windows operating systems.

Flashforge Dreamer

It is compatible with Windows XP, Windows 7, and Windows 8. You can also run it with Mac OS but not Linux.

Flashforge Creator Pro

It is compatible with Windows Mac OSX, and Linux.

The Winner Is- The Flashforge Creator Pro

Accessories

When you buy a 3D printer, you will probably want to get it up and running as soon as possible, so it’s important that you have all that you need in the box.

Flashforge Dreamer

Aside from the Flashforge Dreamer 3D printer, the box includes 2 spools of filament (0.6g of ABS and 0.6g of PLA), a USB cable, a power cord, a tool kit, and a 4GB SD card.

Flashforge Creator Pro

This box is more like Mary Poppins’ handbag! There is the Creator Pro 3D printer, a dual extruder, 2 spool holders, 2 spools of filament (each one kilo and the colors vary), 2 spare blue platform stickers, 2 filament guide tubes, a tool kit, an extruder accessory kit, a power cord, a USB cable, an injected PC top cover, and a 16GB SD card.

The Winner Is- The Flashforge Creator Pro

Pros and Cons

As the differences are so subtle, the following pros and cons will help with deciding between the Flashforge Dreamer and the Flashforge Creator Pro.

Flashforge Dreamer

Flashforge Dreamer comparison

Pros:

  • It is WiFi compatible
  • It doesn’t take long to perfect your 3D printing skills
  • Fantastic printing results with all types of filament

Cons:

  • The two nozzles aren’t the same height and can cause issues with printing

Flashforge Creator Pro

Flashforge Creator Pro

Pros:

  • Excellent machine for those who aren’t tech-savvy
  • It’s easy to assemble
  • It’s open-source, which means if you are looking to upgrade or make adjustments to the 3D printer, you can do so yourself.

Cons:

  • You will need some patience when it comes to balancing the table

The Final Verdict

Today’s winner is the Flashforge Creator Pro. That being said, there is absolutely nothing wrong with the Flashforge Dreamer, in fact, it is cheaper and many will appreciate being able to use WiFi.

The size and overall appearance of the Flashforge Dreamer and Flashforge Creator Pro were too similar to make a difference for us. We also found that the specifications, such as the build volume, were also not enough to affect our decision.

After testing both, we found that they were relatively easy to set up and with the help of the instructions, neither 3D printer took us long to get the desired results.

Although the Flashforge Creator Pro is more expensive, we very much appreciated the massive range of filament material that could be used. We found that this expanded the options we had when creating our projects. It is also advantageous that it is compatible with Linux. You will receive a load of accessories and the SD card which has much more storage. For those people who are more experienced, you will be able to print 3D parts to upgrade and modify your Flashforge Creator Pro 3D printer.


Last update on 2024-03-29 / Affiliate links / Images from Amazon Product Advertising API